Demulsifier is a desalting aid used in desalter unit. It enhances the efficiency of the salt and filterable solid removal in crude. Our customized product guarantees outstanding performance suitable for various kind of crude mixture from each refinery.
Classification
ICHOR Series
Oil Soluble
ICHOR-1100 Series
ICHOR-1104
ICHOR-1104IC
ICHOR-1123
ICHOR-1150
Water Soluble
ICHOR-1130 Series
Our neutralizer effectively reduces the corrosion potential from acid by means of controlling the overhead system pH at lower dosage. Especially the dual functional group of our product will reduce the dosage and minimize the side effect such fouling or under deposit corrosion caused by the formation of neutralization salt.
Classification
ICHOR Series
Neutralizer
ICHOR-1150 Series
In general, filming corrosion inhibitor controls general corrosion caused by condensing of acidic gas from various process overhead system. Especially our oil soluble and water dispersible corrosion inhibitor is available at lower pH operation so that can minimize the uses of neutralizer and also shows good water/oil separation in accumulator (high WSIM value). Our water soluble corrosion inhibitor is effective in gas gathering system such as amine unit saturated with O2, CO2, H2S. Another type of corrosion inhibitor recently developed for treatment of high acid crude is effective in controlling the corrosion at high temperature area from naphthenic acid.
Classification
ICHOR Series
Oil Based
Corrosion Inhibitor
ICHOR-1200 Series
Water Based Corrosion
Inhibitor
ICHOR-1500 Series
Naphthenic Acid Corrosion
Inhibitor
ICHOR-1250 Series
Antifoulant effectively controls the fouling in tower, heat exchanger and reboiler caused by physical, chemical and thermal factors. Especially our antifoulant products consists of dispersant, antioxidant and chain stopper considering the fluid characteristics and process conditions.
Classification
ICHOR Series
Antifoulant
ICHOR-1600 Series
There are two types of Antifoam. One is High Viscosity silicone type with High Thermal Stability and another is Non-silicone Organic Type. Both two types of our antifoam product show outstanding performance in controlling the foam without carry-over of any antifoam composition.
Classification
ICHOR Series
Silicone Type
ICHOR-1300 Series
Non Silicone
Organic Type
ICHOR-1350 Series
Our Metal Passivator product is effective in passivation of contaminant nickel, vanadium, iron and copper in FCC process.
Classification
ICHOR Series
RFCC Metal Passivator
ICHOR-1800 Series
Some specific high acid crude species include a lot of calcium naphthenate,which cause troubles in CDU and downstream process. Our calcium removing agent react with the calcium compound in crude and effectively remove from crude by dissolving in desalter effluent water without any harmful side effects in CDU process and waste water treatment process.
Classification
ICHOR Series
Calcium Removing Agent
ICHOR-1400 Series
ICHOR-8101
ICHOR-8102
ICHOR-8103
Fuel additive added into the diesel and gasoline improves the quality of fuel oil by enhancing lubricity, dropping pour point and preventing oxidation. Combustion catalyst added into diesel or heavy oil such as B-C and LSWR reduce the particulate in exhaust gas and fuel consumption of diesel engine, industrial boiler and gas turbine and other combustion equipment.
Classification
ICHOR Series
Combusition Catalyst
ICHOR 5500 Series
Flow Improver(WAFI, WASA,
PPD)
SR 1600 Series
Diesel Lubricity Improver
SR 2000 Series
Gasoline Antioxidant
UOP Series
It can be added into diesel or heavy oil such as B-C and LSWR reduces the particulate in exhaust gas and fuel consumption of diesel engine, industrial boiler and gas turbine and other combustion equipment.
Classification
ICHOR Series
Combustion Catalyst
ICHOR- 5500Series
Our cleaning agent consists of dispersant and detergent removes effectively the organic and inorganic deposit materials. Especially On-line heater cleaner consists of dispersant and combustion catalyst reducing the deposit formation and make it easy to eliminate the deposit with soot blowing by softening of the ash deposit.
Classification
ICHOR Series
Heat Exchanger Cleaner
ICHOR-1900 Series
Heater On-Line Cleaner
ICHOR-1950 Series
Antifoulant effectively controls the fouling in tower, heat exchanger and reboiler caused by physical, chemical and thermal factors. Especially our antifoulant product consists of dispersant, antioxidant and chain stopper considering the fluid characteristics and process conditions
Classification
ICHOR Series
Furnace Antifoulant
ICHOR 1650 Series
Compressor
and Caustic Tower
Antifoulant
ICHOR 1660 Series
Light End Units Antifoulant
ICHOR 1670 Series
Heavy Fuel Antifoulant
ICHOR 1680 Series
Our emulsion breaker effectively separates the emulsion of oil and water especially pyrolysis gasoline and quench water at DSG unit of ethylene plant.
Classification
ICHOR Series
Emulsion Breaker
ICHOR-1140 Series
In general, filming corrosion inhibitor controls general corrosion caused by condensing of acidic gas from various process overhead system. Especially our oil soluble corrosion inhibitor is available at lower pH operation so that can minimize the uses of neutralizer and also shows good water/oil separation in accumulator (high WSIM value). Our water soluble corrosion inhibitor is effective in gas gathering system such as amine unit saturated with O2, CO2, H2S
Classification
ICHOR Series
Oil Based
Corrosion Inhibitor
ICHOR-1200 Series
Water Based
Corrosion Inhibitor
ICHOR-1500 Series
Our neutralizer product is effective in preventing the corrosion caused by acidic material such as CO2, CO gas and organic or inorganic acid generated or inflowing from Ethylene plant, SM plant and other Amine unit. Especially our neutralizer product minimizes the fouling potential because of minimum formation of neutralization salt.
Classification
ICHOR Series
Neutralizer
ICHOR-1150 Series
There are two types of Antifoam. One is High Viscosity silicone type with High Thermal Stability and another is Non-silicone Organic Type. Both two types of our antifoam product show outstanding performance in controlling the foam without carry-over of any antifoam composition. Especially effective in foam control of Amine units or DSG units.
Classification
ICHOR Series
Silicone Type
ICHOR-1300 Series
Non Silicone
Organic Type
ICHOR-1350 Series
Our cleaning agent consists of dispersant and detergent removes effectively the organic and inorganic deposit materials. Especially On-line heater cleaner consists of dispersant and combustion catalyst reduces the deposit formation and make it easy to eliminate the deposit with soot blowing by softening of the ash deposit.
Classification
ICHOR Series
Heat Exchanger
Cleaner
ICHOR-1900 Series
Heater On-Line
Cleaner
ICHOR-1950 Series
Due to the intensified environmental regulation and lack of water, water recycling is a matter of grave concern for a large volume of water consuming industries such as pulp & paper, steel making, refinery & petrochemical industries. The most critical problem in water recycling process is a scale problem caused by the concentrated hardness material in recycled water. We offer customized chemical for diverse patterns of recycling process with advanced technical service on a basis of accumulated experience and special know-how.
Classification
ICHOR Series
Scale Dispersant
ICHOR-2310
Series
Due to the intensified environmental regulation and lack of water, water reuse is required. We provide various, and customized chemical for diverse patterns of water treatment field.
Classification
ICHOR Series
Poly Ferric Sulfate
ICHOR-2600 Series
Organic Coagulant
ICHOR-2300 Series
Nonion type of Flocculant
ICHOR-2370 PN Series
Anion type of Flocculant
ICHOR-2380 AP,AE Series
Cation type of Flocculant
ICHOR-2390 CP,CE Series
Flocculant for Ore Refining
ICHOR-2500 Series
We offer advanced technology, which works under diverse conditions in boiler water systems. Our advanced treatment program offers superior results over conventional treatment program and allows customized fine-tuning of the program to make it more cost effective.
Classification
ICHOR Series
LP Boiler Chemical
ICHOR-6500 Series
MP&HP Boiler Chemical
ICHOR-6000 Series
Oxygen Scavenger
ICHOR-6200 Series
Neutralizer
ICHOR-6800 Series
We offer advanced technology, which works under diverse conditions in cooling water systems such as open-recirculating, closed and once through systems. Our advanced treatment program is effective in minimizing the corrosion, scale and bio fouling by our customized program suitable for diverse water quality.
Classification
ICHOR Series
Corrosion
Inhibitor--
ICHOR-4100 Series
Scale Dispersant
ICHOR-4300 Series
Biocide
ICHOR-4500 Series
Our Fixing Agent which is composed of low-molecular polymer offers superior pitch control ability in de-inking process. This product offers also superior efficiency of DAF system. This product is effective for reducing white pitch and paper hole when used in printing paper process.
Classification
ICHOR Series
Fixing Agent
ICHOR-3300 Series
Our Strength Agent is classified into dry type and wet type. Anion type of dry strength agent is effective for rosin sizing process that uses Alum in acidic condition, whereas the amphoteric type of dry strength agent can be used in wide ranges of pH conditions. This amphoteric type of dry strength agent is effective for neutral sizing process (AKD, ASA). Our wet type strength agent has a function of retention aid effective in AKD & ASA sizing process as well as effective for reducing dust of facial tissue and enhancing the printability of newsprint.
Classification
ICHOR Series
Strength Agent
ICHOR-3600 Series
Microorganism influences operation of paper machine, so the microorganism control by proper biocide with consideration of plant operating condition is very important for optimal plant operation. We supply properly selected biocide for each plant, especially for color coating process.
Classification
ICHOR Series
Biocide for Paper Machine
ICHOR-3500 Series
Biocide for Coating Color
ICHOR-3550 Series
We supply silicon antifoamer generally used for sewage process and de-aerating agent used for pulp & paper manufacturing process. Specially designed higher grade fatty acid alcoholic De-aerating agent is widely used on account of its defoaming and the elimination of bubbles effects that is stable even in process of the high temperature of 60 ℃.
Classification
ICHOR Series
Antifoamer
ICHOR-2200 Series
De-aerating Agent
ICHOR-3800 Series
Poly Ferric Sulfate made from Ferrous Sulfate is polymerized inorganic product. Our Poly Ferric Sulfate product has an advantage over Alum or PAC in floc formation, floc density, and precipitation rate at a wide pH range. It has also special advantages over other Ferric Chloride or Ferrous Chloride products in lower corrosiveness to equipment. The purity of product is remarkably high, so the second contamination is not concerned. Moreover, it effectively decomposes and coagulates indecomposable substances of the waste water so the organic material will be removed and the color of the treated water will be improved. Our Poly Ferric Sulfate product is most widely used inorganic coagulant.
Classification
ICHOR Series
Poly Ferric Sulfate (KOFERIS Series)
ICHOR-2600 Series
Our Organic Coagulant, a primary waste water treatment chemical eliminates SS effectively. There is almost no sludge generated by chemicals and no decreasing of pH, so that the alkaline costs used for controlling the pH can be reduced. Other kinds of various costs like maintenance costs can be reduced as well.
Classification
ICHOR Series
Organic coagulant
ICHOR-2300 Series
We supply various flocculant used for water treatment in liquid & powder type, and nonion & anion & cation type. Also we supply flocculant for Zeolite process and Titanium Dioxide process. We provide all the technical service for customer such as the selection of proper type of chemicals and consult the optimum operating condition of the facility.
Classification
ICHOR Series
Nonion type of Flocculant
ICHOR-2370 Series
Anion type of Flocculant
ICHOR-2380 Series
Cation type of Flocculant
ICHOR-2390 Series
Polymer Flocculant for mining process
ICHOR-2500 Series
The water separated oil is easily removed by physical separation process. It is, however, not easy to separate the water fusible oil from the water phase. Such n-hexane in water fusible is biodegradable normally but the biodegradation rate is very slow due to the low solubility. Our n-hexane removing agent removes effectively for such water fusible n-hexane by Van der Waals force attraction.
Classification
ICHOR Series
Normal Hexane remover
ICHOR-2770 Series
We supply silicon antifoamer generally used for sewage process and de-aerating agent used for pulp & paper, refinery & petrochemical manufacturing process. Specially designed higher grade fatty acid alcoholic De-aerating agent is widely used on account of its defoaming and the elimination of bubbles effects that is stable even in process of the high temperature of 60 ℃.
Classification
ICHOR Series
Antifoamer
ICHOR-2200 Series
De-aerating Agent
ICHOR-3800 Series
We have been developing & providing chemicals removing various industrial and household odors emitted from air pollutant emission facilities which is the object of odor regulation and facilities under control of household odor regulations. Furthermore, our deodorizer is produced with natural vegetable oil as main material, and it removes odors in the air using vaporizing process. For that reason, our deodorizer shows efficient deodorizing effects in a vast range without any restriction from working-environmental or seasonal difficulties.
Classification
ICHOR Series
Deodorizer
ICHOR-2700 Series
Our product is Magnesium Hydroxide, whose particle size is less than 3 ㎛ .
It is most effective for removing SOx in boiler exhaust.
Excellent High hardness, High Scratch Resistance, Low curing shrinkage, Good optical properties, Good thermal properties & Storage stability
High Scratch Resistance Coating Material for Optical Lenses, High Scratch Resistance Coating Material for Acrylic Sheet, Super Hydrophilic Coating Material, Super Water Repellent Coating Material, Coating Material for Metal Deposition Protection
Classification
ICHOR Series
ICHOR9700 Series
ICHOR9701
ICHOR9704
ICHOR9704A
UV Curing (Cationic photo polymerization) and Thermal curing Siloxane oligomer
Excellent Flexibility, Excellent Scratch Resistance, Low curing shrinkage, High hardness, Good optical properties, Good thermal properties & High Storage stability
Scratch Resistant Coating Material for Optical Lenses, Scratch Resistant Coating Material for Acrylic Sheet, Super Hydrophilic Coating Material, Super Water Repellent Coating Material, Coating Material for Metal Deposition Protection
Classification
ICHOR Series
ICHOR9710 Series
ICHOR9710
ICHOR9710A
ICHOR9710B
ICHOR9710C
ICHOR9710D
ICHOR9710E
UV Curing (Cationic photo polymerization) and Thermal curing Siloxane oligomer
Excellent thermal Stability, High Scratch Resistance, Reversal Curl, Excellent Low curing shrinkage, High hardness, Good optical properties, High thermal properties & High Storage stability
Scratch Resistant Coating Material for Optical Lenses, Scratch Resistant Coating Material for Acrylic Sheet, Super Hydrophilic Coating Material, Super Water Repellent Coating Material, Coating Material for Metal Deposition Protection
Classification
ICHOR Series
ICHOR9720 Series
ICHOR9720A
ICHOR9720B
ICHOR9720C
ICHOR9720B2
The Coating solution of UV curing type
Substrates of PET, PMMA and plastics for display and smartphone
The Coating solution of UV curing type for Thermoforming & 3D forming
Substrates of PET, PMMA and plastics for display and smartphone
Excellent thermal Stability, High Scratch Resistance, Excellent Low curing shrinkage, High hardness, Good optical properties, High Storage stability, Reversal curl, easy-clean, AFP
Classification
ICHOR Series
ICHOR9754F Series
ICHOR9754F
ICHOR9754FC
ICHOR9754FRC
The Coating solution of UV curing type
Substrates of PET, PMMA and plastics for display and smartphone
Reversal Curl, Excellent thermal Stability, High Scratch Resistance, Excellent Low curing shrinkage, High hardness, Good optical properties, High thermal properties & High Storage stability, easy-clean, AFP
Classification
ICHOR Series
ICHOR9738 Series
ICHOR9738UR
ICHOR9738UR10
ICHOR9738URH
ICHOR9738URP
The Coating solution of UV curing type
The substrates of Colorless PI and bendable plastics for OLED display and smartphone Window
Excellent Flexibility, Excellent Scratch Resistance, Low curing shrinkage, High hardness, Good optical properties, Good thermal properties & High Storage stability, Low curl, easy-clean, AFP
Classification
ICHOR Series
ICHOR9710HAF Series
ICHOR9710HAF1
ICHOR9710HAF2
ICHOR9710HAF3
ICHOR9710H Series Printable Type
ICHOR9710HA
ICHOR9710HB
The Coating solution of UV curing type
The Silver Nano-wire over coating solution of High transmittance printable type & The Barrier Over coating solution of High transmittance printable type
High Adhesion for metal substance, High hardness, Scratch Resistance, Low curing shrinkage, Good optical properties, Good thermal properties, Low curl, easy-clean, AFP
Classification
ICHOR Series
ICHOR9741 Series
ICHOR9741
ICHOR9741O
ICHOR9741OAF
The Coating solution of UV curing type
Substrates of PET, PMMA and plastics for display and smartphone